Filter
Top Products
94 CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS
4 Press Enter.
The Internetworking Configuration screen appears.
5 In the displayed menu, select Boards, and then
press Enter.
6 Press Insert.
A list of currently installed drivers appears.
7 Press Insert again.
The New Driver dialog box appears.
8 Specify the directory:
a:\nwserver\3c99x.lan
9 Press Enter.
An updated list of installed drivers appears.
10 Select 3C99x, and then press Enter.
You are prompted to name the NIC, for example: 3c99x_1.
11 Type the name of the NIC and press Enter.
You are prompted for the slot number. For information on
how to verify the slot number, see Verifying the PCI Slot
Number on page 99.
12 Enter the slot number, and then press Enter.
13 Press Esc, Enter (to save), and then Esc.
The Internetworking Configuration screen appears.
14 Select Bindings, and then press Enter.
The configured protocols for installed NICs appears.
(This list will be empty if no protocols are currently
bound to the NIC.)
15 Press Insert.
The Select From the List of Configured Protocols screen
appears.
For NetWare 5.0:
■ The default To a Network Interface is selected.
Press Enter.
The Select a Configured Network Interface
screen appears.