Filter
Top Products
168 APPENDIX E: INSTALLING A 3COM NIC WHILE INSTALLING THE NOS
Installation Instructions
These instructions are for installing from the 3Com
EtherLink Server NIC CD. If you download 3Com software
from the Web and make installation diskettes to use for the
installation, the steps are slightly different (you do not need
to remove and replace the NetWare CD).
1 Install the NIC hardware and connect it to the
network.
2 Start the installation and proceed as usual until you
reach the Device Types screen.
3 In the Device Types screen:
Locate the Network Boards field, and notice that there are
no NICs listed. From the Options menu, select Modify.
4 In the next screen, select Network Boards and
press Enter.
5 Press Ins (Add a Board).
6 Press Ins (Add Unlisted Driver).
7 Remove the NetWare CD from the CD-ROM drive.
8 Insert the 3Com EtherLink Server CD in the CD-ROM
drive.
9 Press F3.
10 Enter the location of the driver on the 3Com CD.
For example:
D:\nwserver
11 In the Driver Summary screen, select 3C990.LAN and
press Enter.
Edit parameters as necessary.
12 From the Additional Driver Options menu, select
Return to Driver Summary.
13 Remove the 3Com CD from the CD-ROM drive.
14 Insert the NetWare CD in the CD-ROM drive.