Filter
Top Products
54 CHAPTER 3: INSTALLING NIC DRIVERS IN WINDOWS
8 Make sure that d:\ appears in the entry box (where
d:\ represents the letter name of the CD-ROM drive),
and then click OK.
The Select OEM Option screen appears with the name
of one of the NICs selected. Only one NIC appears on
this screen.
9 Click OK.
Files are copied. The Network screen appears with the
name of the first installed NIC.
10 Close the Network screen.
If you are prompted for network information, enter the
requested information.
11 Restart the PC.
12 When Windows NT starts, repeat steps 3 through 11
for each NIC that is installed in the PC.
You will not be prompted for the EtherCD when you
install the network driver for the second NIC.