Filter
Top Products
70 CHAPTER 4: INSTALLING DYNAMICACCESS SOFTWARE IN WINDOWS
Deleting or Editing a VLAN
When a VLAN is selected, you can delete it or edit its
properties.
1 Click the VLANs tab.
2 In the VLANs window, select a VLAN.
To delete the selected VLAN, click Delete VLAN.
To edit the VLAN ID for the selected VLAN, click Edit VLAN.
Displaying NIC Properties
Follow these steps to display NIC properties:
1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, select a NIC.
3 Click Properties.
The NIC Properties window appears, showing the
properties of the selected NIC.
Displaying Group Properties
Follow these steps to display group properties:
1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, select a group in
the Load Balancing/RSL Groups list box.
3 Click Properties.
The Group Properties window appears, showing the
properties of the selected group.
Specifying Failover from Gigabit to 10/100 PCI
You can specify failover from a 3Com Gigabit Etherlink
Server 1000 PCI NIC to a 3Com EtherLink Server 10/100
PCI NIC. To ensure optimal performance, this type of
failover requires that you disable load balancing for
the group.
1 Create a group.
See Creating a Group.