Filter
Top Products
4
INSTALLING DYNAMICACCESS
SOFTWARE IN WINDOWS
Overview
This chapter explains the following tasks on a computer
running Windows 2000, Windows NT, Windows 98, or
Windows 95:
■ Installing the DynamicAccess LAN Agent for a client NIC
■ Installing DynamicAccess software for a server NIC
■ Configuring Groups and VLANs for a server NIC
■ Using Windows 2000 offload features
■ Installing DynamicAccess LAN Encryption Software
Installing the DynamicAccess LAN Agent for a Client NIC
This section explains how to install and configure the
DynamicAccess LAN agent on a client PC running
Windows 95, Windows 98, or Windows NT 4.0.
Client PC Requirements
The DynamicAccess LAN agent can be installed on a PC
running Windows 95, Windows 98, or Windows NT 4.0.
The DynamicAccess LAN agent is not supported on a PC
running Windows 2000.
For an overview of the DynamicAccess LAN agent, see
DynamicAccess LAN Agent on page 25. For detailed
information on using, configuring, and troubleshooting
the DynamicAccess LAN agent, you can download
it from:
http://www.3com.com/dynamicaccess
CAUTION: Do not install the DynamicAccess LAN agent
on a PC running Windows 98 SE 1. The installation will
result in system failure.