Filter
Top Products
Installing DynamicAccess LAN Encryption Software 77
Minimum Installation Requirements
Your computer must meet the following requirements
before you can successfully install the DynamicAccess LAN
Encryption software.
Hardware Requirements:
■ Pentium 90 or better
■ 24 MB RAM
■ 25 MB free hard disk space (Windows 95);
17 MB free hard disk space (Windows 98)
■ Color monitor
Software Requirements:
■ Windows 95A or Windows 95B (OSR2) or Windows 98
or Windows 98SE. Your Windows operating system
should have the latest Service Pack installed.
■ TCP/IP protocol.
■ Client for Microsoft networks installed and configured
to log in to a domain.
Installation Overview
The 3Com EtherLink 10/100 PCI NIC must be installed and
connected to the network before you install
DynamicAccess LAN Encryption software. See Installing and
Connecting the NIC on page 27 for instructions.
Installing the DynamicAccess LAN Encryption software
involves the following tasks:
1 Installing the software using the Custom option to
download the DynamicAccess LAN Encryption
Software Administrator’s Guide.
2 Certifying each user (this task applies only when
users rely on certificates for authentication).
Installing LAN Encryption Software on Windows 95
To install DynamicAccess LAN Encryption software on
Windows 95, you need the installation CD (EtherCD) with
your customized policy file(s), entrust.ini file (if you are
using certificate-based authentication), and any connection
profiles you wish to include.