Filter
Top Products
86 CHAPTER 4: INSTALLING DYNAMICACCESS SOFTWARE IN WINDOWS
Starting DynamicAccess LAN Encryption Software
You start the DynamicAccess LAN Encryption software by
choosing a secure profile.
1 Right-click the padlock icon in the taskbar to see the
secure profiles on your system.
2 Select the secure profile you want to use from
the list.
■ If your organization is set up to use certificates to
authenticate the users on the network, you are
prompted to provide your user name and password.
Find your name in the User File list and provide your
password in this dialog box.
■ If your organization is not using certificates to
authenticate users, you are prompted to provide the
shared secret for the connection. A shared secret
must be agreed upon between you and the system
to which you are connecting to secure the data
communication.
3 To switch to a different secure profile, right-click the
padlock icon in the taskbar and select a different
profile. The profile in use displays a check mark next
to it.
You will be prompted to enter your user name and
password for certificate authorization, or provide a shared
secret when you switch to a different secure profile.
For further information, view the online DynamicAccess
LAN Encryption Software Administrator’s Guide, as
described in the next section.
Viewing the Administrator’s Guide Online
The EtherCD containing the DynamicAccess LAN
Encryption software also contains an online software
administrator’s guide in WebHelp format. You can view the
guide with the following recommended Internet browsers,
which are freely available on the Internet or from the
manufacturer on CD:
■ Microsoft Internet Explorer Version 4 or later
■ Netscape Navigator Version 4.03 or later