Chapter 64: SNMPv3 Commands
976
NO SNMP-SERVER USER
Syntax
no snmp-server user
user
Parameters
user
Specifies the name of a user you want to delete from the switch.
The name is case sensitive.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv3 users. You can delete just one user
at a time with this command.
Confirmation Command
“SHOW SNMP-SERVER USER” on page 981
Example
This example deletes the SNMPv3 user “tedwards”:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server user tedwards