AT-9000 Switch Command Line User’s Guide
917
NO AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS
Syntax
no aaa authentication dot1x default group radius
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable 802.1x port-based network access control on
the switch. All authenticator ports forward packets without any
authentication. This is the default setting.
Confirmation Command
“SHOW DOT1X” on page 927
Example
This example disables 802.1x port-based network access control on the
switch:
awplus> enable
awplus# configure terminal
awplus(config)# no aaa authentication dot1x default group
radius