Chapter 68: LLDP and LLDP-MED Commands
1086
NO LLDP RUN
Syntax
no lldp run
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable LLDP and LLDP-MED on the switch. The
switch, when LLDP and LLDP-MED are disabled, neither sends
advertisements to nor collects information from its neighbors. The LLDP
settings are retained by the switch.
Confirmation Command
“SHOW LLDP” on page 1091
Example
This example disables LLDP and LLDP-MED on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no lldp run