525
Chapter 37
Static Port Trunk Commands
The static port trunk commands are summarized in Table 58 and
described in detail within the chapter.
.
Table 58. Static Port Trunk Commands
Command Mode Description
“NO STATIC-CHANNEL-GROUP” on
page 526
Port Interface Removes ports from existing static
port trunks and deletes trunks from
the switch.
“PORT-CHANNEL LOAD-BALANCE”
on page 527
Static Port
Trunk Interface
Sets the load distribution methods of
static port trunks.
“SHOW STATIC-CHANNEL-GROUP”
on page 529
User Exec and
Privileged Exec
Displays the specifications of the
static port trunks.
“STATIC-CHANNEL-GROUP” on
page 530
Port Interface Creates a new static port trunk and
adds ports to an existing static port
trunk.