Filter
Top Products
AT-9000 Switch Command Line User’s Guide
335
An example of the table is shown in Figure 77.
Figure 77. SHOW MAC ADDRESS-TABLE Command
The Aging Interval field at the top of the table displays the aging timer of
the MAC address table.
The Switch Forwarding Database displays the static and dynamic unicast
MAC addresses the switch has stored in the table. The first address is the
MAC address of the switch. The columns are defined in Table 34.
Aging Interval: 300 second(s)
Switch Forwarding Database
------------------------------------------------------------
VLAN Port MAC Fwd
------------------------------------------------------------
1 1.0.1 00a0.d218.1ac8 Forward Dynamic
1 1.0.2 00a0.c416.3b80 Forward Dynamic
1 1.0.3 00a0.12c2.10c6 Forward Dynamic
1 1.0.4 00a0.c209.10d8 Forward Dynamic
1 1.0.4 00a0.3343.a187 Forward Dynamic
1 1.0.4 00a0.12a7.1468 Forward Dynamic
.
.
.
------------------------------------------------------------
Total Number of MAC Addresses: 121
Multicast Switch Forwarding Database
Total Number of MCAST MAC FDB Addresses: 1
---------------------------------------------------------------------
VLAN MAC Port Maps (U:Untagged T:Tagged)
---------------------------------------------------------------------
1 01:00:51:00:00:01 Static U:18-24
T:
Table 34. SHOW MAC ADDRESS-TABLE Command - Unicast Addresses
Parameter Description
VLAN The ID number of the VLAN where the
port is an untagged member.
Port The port where the address was learned
or assigned. The MAC address with port 0
is the address of the switch.
MAC The dynamic or static unicast MAC
address learned on or assigned to the
port.