AT-9000 Switch Command Line User’s Guide
893
“NO AUTH-MAC ENABLE” on
page 921
Port Interface Deactivates MAC address-based
authentication on authenticator ports.
“NO DOT1X PORT-CONTROL” on
page 922
Port Interface Removes ports from the authenticator
role.
“SHOW AUTH-MAC INTERFACE” on
page 923
Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW AUTH-MAC
SESSIONSTATISTICS INTERFACE”
on page 924
Privileged Exec Displays EAP packet statistics of
authenticator ports.
“SHOW AUTH-MAC STATISTICS
INTERFACE” on page 925
Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW AUTH-MAC SUPPLICANT
INTERFACE” on page 926
Privileged Exec Displays the number and types of
supplicants on authenticator ports.
“SHOW DOT1X” on page 927 Privileged Exec Displays whether 802.1x port-based
network access control is enabled or
disabled on the switch and the IP
address of the RADIUS server.
“SHOW DOT1X INTERFACE” on
page 928
Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW DOT1X STATISTICS
INTERFACE” on page 929
Privileged Exec Displays EAP packet statistics on
authenticator ports.
“SHOW DOT1X SUPPLICANT
INTERFACE” on page 930
Privileged Exec Displays the number and types of
supplicants on authenticator ports.
Table 87. 802.1x Port-based Network Access Control Commands (Continued)
Command Mode Description