Chapter 1: AlliedWare Plus Command Line Interface
28
Moving Up the Hierarchy
There are four commands for moving up the mode hierarchy. They are the
EXIT, QUIT, END and DISABLE commands.
EXIT and QUIT
Commands
These commands, which are functionally identical, are found in nearly all
the modes. They move you up one level in the hierarchy, as illustrated in
Figure 15.
Figure 15. Moving Up One Mode with the EXIT and QUIT Command
END Command After you have configured a feature, you may want to return to the
Privileged Exec mode to verify your changes with the appropriate SHOW
command. You can step back through the modes one at a time with the
EXIT or QUIT command. However, the END command is more convenient
because it moves you directly to the Privileged Exec mode from any mode
below the Global Configuration mode.