Chapter 44: RSTP Commands
640
SPANNING-TREE RSTP ENABLE
Syntax
spanning-tree rstp enable
Parameters
None
Mode
Global Configuration mode
Description
Use this command to enable the Rapid Spanning Tree Protocol on the
switch. You cannot enable RSTP until you have activated it with
“SPANNING-TREE MODE RSTP” on page 634.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 130 or “SHOW SPANNING-TREE”
on page 624
Example
This example enables RSTP on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree rstp enable