545
Chapter 39
LACP Commands
The LACP port trunk commands are summarized in Table 59 and
described in detail within the chapter.
Table 59. LACP Port Trunk Commands
Command Mode Description
“CHANNEL-GROUP” on page 546 Port Interface Creates new aggregators and adds
ports to existing aggregators.
“LACP SYSTEM-PRIORITY” on
page 548
Global
Configuration
Sets the LACP system priority value
for the switch.
“NO CHANNEL-GROUP” on
page 549
Port Interface Removes ports from aggregators and
deletes aggregators.
“PORT-CHANNEL LOAD-BALANCE”
on page 550
LACP Port
Trunk Interface
Sets the load distribution method.
“SHOW ETHERCHANNEL” on
page 552
Privileged Exec Displays the ports of the aggregators
on the switch.
“SHOW ETHERCHANNEL DETAIL”
on page 553
Privileged Exec Displays the states of the ports of the
aggregators.
“SHOW ETHERCHANNEL
SUMMARY” on page 555
Privileged Exec Displays detailed information about
the aggregators.
“SHOW LACP SYS-ID” on page 556 Privileged Exec Displays the LACP priority value and
MAC address of the switch.
“SHOW PORT ETHERCHANNEL” on
page 557
Privileged Exec Displays the LACP port information.