AT-9000 Switch Command Line User’s Guide
547
Examples
These commands create a new aggregator consisting of ports 11 to 16.
The ID number of the aggregator is 2.
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.11-port1.0.16
awplus(config-if)# channel-group 2
This example adds port 15 to an existing aggregator that has the ID
number 4:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15
awplus(config-if)# channel-group 4