Chapter 55: Voice VLAN Commands
816
NO SWITCHPORT VOICE VLAN
Syntax
no switchport voice vlan
Parameters
None
Mode
Port Interface mode
Description
Use this command to remove a port from a voice VLAN. A port retains the
CoS priority and DSCP values that were assigned to it when it was a voice
VLAN member.
Confirmation Command
“SHOW VLAN” on page 716
Example
This example removes ports 7 and 8 from their voice VLAN assignment:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.7,port1.0.8
awplus(config-if)# no switchport voice vlan