Chapter 63: SNMPv1 and SNMPv2c Commands
954
NO SNMP TRAP LINK-STATUS
Syntax
no snmp trap link-status
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable the transmission of SNMP link status
notifications (traps) when ports establish links (linkUp) or lose links
(linkDown) to network devices.
Confirmation Command
“SHOW INTERFACE” on page 193
Example
This example disables the transmission of link status notifications on ports
17 and 21:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.17,port1.0.21
awplus(config-if)# no snmp trap link-status