361
Chapter 20
Enhanced Stacking Commands
The enhanced stacking commands are summarized in Table 36.
Table 36. Enhanced Stacking Commands
Command Mode Description
“ESTACK COMMAND-SWITCH” on
page 363
Global
Configuration
Designates the switch as the
command switch.
“ESTACK RUN” on page 364 Global
Configuration
Activates enhanced stacking on the
switch.
“NO ESTACK COMMAND-SWITCH”
on page 365
Global
Configuration
Returns the switch to the state of
being a member switch.
“NO ESTACK RUN” on page 366 Global
Configuration
Disables enhanced stacking on the
switch.
“RCOMMAND” on page 367 Global
Configuration
Redirects the management session to
a different switch in the enhanced
stack.
“REBOOT ESTACK MEMBER” on
page 368
Global
Configuration
Reboots member switches of an
enhanced stack from the command
switch.
“SHOW ESTACK” on page 370 Privileged Exec Displays whether the switch is a
command or member switch and
whether enhanced stacking is enabled
or disabled.
“SHOW ESTACK COMMAND-
SWITCH” on page 372
Privileged Exec Displays enhanced stacking
information about the command
switch from a member switch.
“SHOW ESTACK REMOTELIST” on
page 373
Privileged Exec Displays the switches of an enhanced
stack.
“UPLOAD CONFIG REMOTELIST” on
page 375
Global
Configuration
Uploads boot configuration files from
the file system in the command switch
of an enhanced stack to the member
switches.