AT-9000 Switch Command Line User’s Guide
919
NO AUTH GUEST-VLAN
Syntax
no auth guest-vlan
Parameters
None
Mode
Port Interface mode
Description
Use this command to remove the VID of a guest VLAN from an
authenticator port.
Confirmation Command
“SHOW AUTH-MAC INTERFACE” on page 923
“SHOW DOT1X INTERFACE” on page 928
Example
This example removes the guest VLAN from ports 23 and 24:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.23,port1.0.24
awplus(config-if)# no auth guest-vlan