Chapter 57: VLAN Stacking Commands
832 Section III: File System
NO SWITCHPORT VLAN-STACKING
Syntax
no switchport vlan-stacking
Parameters
None.
Mode
Port Interface mode
Description
Use this command to remove ports from VLAN stacking.
Confirmation Command
“SHOW VLAN VLAN-STACKING” on page 834
Example
This example removes ports 3 to 16 and 21 from VLAN stacking:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.3-port1.0.16,port1.0.21
awplus(config-if)# no switchport vlan-stacking