Filter
Top Products
Firmware Pages and Descriptions
132
7" Modero Widescreen Touch Panels
It is important to note which certificate types are supported by the different certificate fields used on the
configuration screens (PEAP, TTLS, and TLS). The following table outlines the firmware fields and their
supported certificate types.
System Settings Page
The System Settings page (FIG. 112) sets the Secondary DNS Address information with its
corresponding IP communication parameters, NetLinx Master communication settings, and reads the
device number assigned to the Modero panel.
The elements of the System Settings page are described in the table below:
Certificate Types Supported by the Modero Firmware
Configuration Field Name Certificate File Type Supported
Certificate Authority
field PEM and DER
Client Certificate
field PEM and DER
Private Key
field .PEM, DER, and PKCS12
FIG. 112
System Settings page showing default values (reads and assigns values to the panel and Master)
System Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
IP Settings section
Master Connection section
(NetLinx Master properties)
Master Connection features do not take
effect until the panel is rebooted
Red fields are user-editable
Blue fields cycle through choices
Grey fields are read-only