Filter
Top Products
CV7 Touch Panel Accessories
11
7" Modero Widescreen Touch Panels
When connecting the MIC OUT connector to a balanced audio input (FIG. 9), use all three audio
terminals (+, -, and GND), then connect the "+" terminal to the "live" signal, the "-" terminal to the
"return" signal, and the "GND" terminal to the ground signal.
Modero Table Top Cable (CA2250-50)
The Table Top Touch Panel comes with a standard 10' (3.048 m) Modero cable (CA2250-50) that
supports Ethernet, Audio/Video, and Power connections. The cable comes terminated with two RJ45
connectors (Ethernet and Audio/Video) and a single 2-pin mini-Phoenix connector for power.
Product Specifications
FIG. 9 Wiring the rear MIC OUT connector for use with Balanced Audio
FIG. 10 10 Foot Modero Table Top Cable
Modero Table Top Cable Specifications
Dimensions (HWD): • Length: 10 feet (3.048 m)
Connectors: • Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
panel and the NXA-AVB/ETHERNET Breakout Box.
• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
between the touch panel and the box.
• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
breakout box to the target panel.
Included Accessories: • Modero Table Top Cable (CA2250-50)
Balanced OUT
GND
OUT-
OUT+
Ground signal
Return signal
Line signal