Filter
Top Products
Configuring Communication
64
7" Modero Widescreen Touch Panels
6. Enter the SSID information by either:
Automatically having it filled in by pressing the Site Survey button and from the Site Survey
page, choosing an Open WAP from within the Site Survey page and then pressing the
Connect button.
Manually entering the SSID information into their appropriate fields by following
steps 7 thru 9.
7. From within the Wireless Security section, press the Open (Clear Text) button to open the Open
(Clear Text) Settings dialog (FIG. 62). An Open security method does not utilize any encryption
methodology but does require that an SSID (alpha-numeric) be entered. Using this method causes
network packets to be sent out as unencrypted text.
8. Press the red SSID field (FIG. 62) to display an on-screen Network Name (SSID) keyboard.
9. In this keyboard, enter the SSID name used on your target Wireless Access Point (case sensitive).
The card should be given the SSID used by the target WAP. If this field is left blank, the unit
will attempt to connect to the first available WAP. By default, all WAP200Gs use AMX as
their assigned SSID value.
FIG. 61 Site Survey of available WAPS (Unsecured WAP shown selected)
FIG. 62 Wireless Settings page - Open (Clear Text) security method
Select an OPEN
(unsecured) WAP
Connecting to the
WAP begins the
communication
Required Information:
- SSID (Network Name used by the Target WAP)
By default, this field displays the
SSID - AMX