AMX CV7 Computer Monitor User Manual


 
CV7 Touch Panel Accessories
30
7" Modero Widescreen Touch Panels
Charging the NXT-BP using the NXA-BASE/1
1.
Insert the single battery into the battery compartment shown in FIG. 28 on page 29.
2. Follow the procedures from the previous sub-section to attach the NXT-CV7 to the NXA-BASE/1.
3. Insert a 2-pin connector from a power supply to the rear PWR connector on the NXT-CV7 Modero
panel. Refer to the Battery Base Page section on page 98 to view the charging progress of the
connected NXT-BP.
NXT-CHG Battery Charger Kit (FG2255-50K)
The NXT-CHG Kit includes one charger and two NXT-BP batteries. The optional NXT-CHG Modero
Power Station (FIG. 30) is a two-slot, stand-alone battery charger that can be used to recharge up to two
NXT-BP batteries. The batteries are charged in the order they are inserted into the charger. The
NXT-CHG Slot 1 has the feature of being able to completely discharge and recharge (recalibrate) a
battery.
Powering the NXT-CHG
FIG. 30 NXT-CHG Kit (consists of one NXT-CHG charger and two NXT-BP batteries)
NXT-BP and NXT-CHG Specifications
Dimensions (HWD): 1.13" x 8.63" x 11.81" (2.86 cm x 21.91 cm x 30.00 cm)
Power Requirements: NXT-BP Battery Voltage - 11.1 Volts
NXT-CHG: 90 - 264 VAC, 47-63 Hz, Single Phase
(using the included 24 VDC power supply)
Weight: 0.57 lbs (0.26 kg)
Features: Charge time for two depleted batteries: ~ 5 hours
Charge Rate: 2.5 A @ 12 VDC
2-Bays: Sequential charging
LED: One LED indicator in front of each bay which conveys the status of that
bay. Refer to the Reading the NXT-CHG LED Indicator section for more
information.
Recalibration pushbutton (located between the bays): Initiates recalibration
sequence in the left bay only.
Recalibration Time: less than 9 hours
Other AMX Equipment: NXT-CHG Kit (FG2250-50K):
- 1 charger and 2 NXT-BP batteries
NXT-BP battery pack (FG2255-10) (additional)
NXT-CHG Modero Power Station (charger)
NXT-BP Modero Power Pack (battery)
Battery Life indicator
Recalibration improves the reporting accuracy of the battery charge back to the
Modero panel.