Filter
Top Products
CV7 Touch Panel Accessories
27
7" Modero Widescreen Touch Panels
NXA-BASE/1 Battery Base Kit (FG2255-05K)
The NXA-BASE/1 Kit contains a single NXT-BP battery and one battery base. The NXA-BASE/1
(FIG. 25) is a Modero accessory that allows an NXT-CV7 touch panel to function off the charge from a
single internally connected NXT-BP battery. The base provides both power and battery information to
the panel via the panel interface connector. The NXT-BP battery can be charged through either the base
(only when connected to the NXT-CV7 touch panel) or through an optional NXT-CHG Modero Power
Station Kit (FG2255-50K). When used with the optional battery base, the CV7 panels will charge the
battery during full operation.
Checking the NXT-BP charge
1.
Press the Battery Life Indicator button (FIG. 26) once to illuminate the Battery Life LEDs and
display the percent charge remaining on the battery (this indication lasts a few seconds).
2. Charge the NXT-BP battery by either inserting it into the battery base or from within the optional
NXT-CHG charger (which can sequentially charge up to two batteries).
FIG. 25 NXA-BASE/1 Kit (consists of one BASE/1 and a single NXT-BP)
NXA-BASE/1 Specifications
Dimensions (HWD): • 0.93" x 5.96" x 6.89" (2.36 cm x 15.14 cm x 17.51 cm)
Power Requirements: • 1.4 A @ 12 VDC (max power draw while charging a single battery)
Weight: • Base unit: 0.75 lbs (0.34 kg)
• Base and 1 battery: 1.75 lbs (0.79 kg)
Features: • Charge time for single depleted battery: ~ 5 - 8 hours
• Must be connected to a Modero unit utilizing a 12 VDC-compliant power
supply
Operating / Storage
Environment:
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included Accessories: • NXA-BASE/1 (FG2250-05k): 1 battery base and 1 NXT-BP battery
Other AMX Equipment: • NXT-CHG Kit (FG2250-50K):
1 charger and 2 NXT-BP batteries
• NXT-BP battery pack (FG2255-10) (additional)
NXA-BASE/1
NXT-BP
Battery Base
Modero Power Pack
Panel Interface
connector
Before beginning the installation of the battery base to the Modero panel, verify the
Modero panel has the latest firmware. Only the latest build incorporates the
necessary updates for using the Modero with the NXA-BASE/1. From the Battery
Base page, verify that the battery base is loaded with the latest NXA-BASE/1
firmware (v2.xx or higher).