Filter
Top Products
iMac (24-inch Mid 2007) Take Apart — CPU Fan 109
Replacing the CPU Fan
Lower the fan onto the guide posts in the rear housing. Push it down onto the posts.1.
Press the foam gasket into place at the top of the fan.2.
Connect the ambient temp sensor cable and the fan cable to the logic board connectors. 3.
Replace the left speaker.4.
Replace the display panel.5.
Replace the front bezel6. .
Clean and replace the glass panel7. . Note: This step is very important. Follow the procedures
to ensure the glass is clean and free of particles.
Replace the access door8. .