Filter
Top Products
iMac (24-inch Mid 2007) Take Apart — LCD Display Panel 78
4. Remove the eight T8 screws from the sides of the panel frame.
Grasp the LCD panel at the bottom edge, and tilt up the panel. Peel back the black tape 5.
covering the inverter cable connector on the back of the LCD panel. Pull the connector
straight out, toward the power supply. If you are replacing the cable, disconnect the other
end from the power supply. Lift the LCD panel o the rear housing.
Important: To prevent the buildup of static charges which may attract dust particles to
the surface of the display, store the LCD panel in an anti-static bag whenever it has been
removed from the system.
922-8172