iMac (24-inch Mid 2007) Take Apart — Glass Panel 39
Clean the INSIDE surface of the glass panel with the silicone roller. Gently roll the clean 5.
silicone roller over the inside surface of the glass. Note: If ngerprints and oils are on the
inside of the glass, clean the inside rst with isopropyl alcohol.
Holding the glass by the edges, carefully line up the metal pins on the inside of the glass 6.
panel with the holes at the top of the front bezel and the hole at the bottom of the bezel.
Gently lower the glass panel onto the bezel. The magnets on the front bezel will pull and
hold the glass panel in place.