Filter
Top Products
iMac (24-inch Mid 2007) Take Apart — LVDS Cable 93
Replacing the LVDS Cable
Connect the LVDS cable to the rear of the display panel.1.
Replace the clear Kapton tape over the LVDS cable connector.2.
Connect the inverter cable to the inverter board on the rear of the panel. Cover the cable 3.
and connector with the sticky, black mylar tape.
Lower the display into the rear housing.4.
Connect the other end of the inverter cable to the power supply.5.
6. Connect the LVDS cable to the logic board. Replace the two T6 screws.
922-7010