Filter
Top Products
iMac (24-inch Mid 2007) Take Apart — Audio Board 158
Replacing the Audio Board
1. Install the audio board onto the logic board.
Replace the four T6 screws, connect the left speaker, the microphone, and the exible cable.2.
Replace the right speaker3. and connect the speaker cable to the audio board.
Replace the logic board.4.
Replace the right speaker5. .
Replace the display panel.6.
Replace the front bezel7. .
Clean and replace the glass panel8. . Note: This step is very important. Follow the procedures
to ensure the glass is clean and free of particles.
Replace the access door9. .
922-7010