iMac (24-inch Mid 2007) Take Apart — Glass Panel 40
Peel the protective lm from the outside surface of the glass panel. If the glass panel pulls 7.
away from the front bezel, gently hold it in place while removing the protective lm.
8. Clean the outside of the glass panel with a clean microber cleaning cloth. If necessary,
spray a small amount (two pumps) of iKlear polish on the outside of the glass panel. Wipe
the glass until the solution completely disappears and there is no longer any residue or haze.
Once the glass has been cleaned and polished, visually inspect the glass for any remaining 9.
dust, ngerprints, or a hazy residue. If there are contaminates trapped between the LCD
panel and the glass panel repeat the cleaning procedure described in this section before
returning the system to the customer.
Replace the memory access door.10.