Filter
Top Products
iMac (24-inch Mid 2007) Take Apart — Front Bezel 47
Replacing the Front Bezel
Place the computer on a soft protective lint-free surface such as a very clean ESD mat to 1.
avoid damaging the nish on the stand or rear housing.
Position the computer on the rear cover with the stand facing you. 2.
Position the bottom of the front bezel over the bottom edge of the rear cover. 3.
Lower the front bezel, connect the microphone cable to the extension cable and tuck the 4.
cable into the computer housing. Carefully lower the bezel onto the computer, and make
sure the cable cannot be pinched.