Filter
Top Products
The network printer keeps restarting.
n Someone on the network may be using a different version of
the printer software. Everyone connected to a network should
use the same printer software version. Consult the network
administrator for more information.
Nothing happens, or you see an error message, when you
try to print.
n The printer may not be turned on. Make sure it is turned on
and warmed up.
n The printer may be out of paper or have some other problem.
Check the printer status lights and any messages on your
screen.
n If an error message states that the printer could not print your
document, turn the printer off for at least 10 seconds. Then
turn it on again, wait for it to warm up, and try to print again.
Your documents are printed with the wrong fonts.
n The printer may not have your fonts in its memory and is
substituting other fonts. You may be able to add the necessary
fonts to your printer (see Chapter 11), or print on a different
printer that has the fonts you want. If you have a LaserWriter,
you can turn off Font Substitution in the Page Setup dialog
box.
See Chapter 11 for general information about printing documents.
See the printer manual for more information about your printer’s
features or problems with the printed output.
294 Quick Reference