Filter
Top Products
8-2 VS1-MD AC Drive User Manual
8.1.2 Frequency Setting via –10 to +10[V] Input
Apply –10V to +10V signal between V1 and CM terminal.
Output frequency corresponding to –10V to +10V input voltage to V1 terminal
Group Code Parameter Name Setting Range Initial Unit
Drive
group
P37 [Frequency Command] - 0 to400 0.00 Hz
P40 [Frequency Mode] 2 1 to 7 1
t40 TO
t44
t36 [NV Input Minimum Voltage] - 0 to -10 0.0 V
t37 [Frequency Corresponding to
t36]
- 0 to 400 0.00 Hz
t38 [NV Input Max Voltage] - 0 to 10 10.00 V
t39 [Frequency Corresponding to
t38]
- 0 to 400 60.00 Hz
t40 to
t44
[V1 Input]
Step 1. Set P40 [Frequency Setting Method] to “2”.
Step 2. The set frequency can be monitored in D-0[Frequency Command].