Filter
Top Products
8-26 VS1-MD AC Drive User Manual
8.11.13 Wait Time for Run Signal Input
This function becomes active during normal operation and that the inverter waits for
active run command from external sequence.
8.11.14 Fault Output
The parameter set in t34 is activated.
For example, if setting t33, t34 to 17 and 2, respectively, Multi-function output relay will
become active when trip other than “Low voltage trip” occurred.
8.11.15 Cooling Fan Trip Alarm
Used to output alarm signal when H78 is set to ”0”(constant operation at cooling fan
trip).