Filter
Top Products
6-2 VS1MD AC Drive User Manual
6.2 LED Descriptions
Refer to figure 6.1 for the location of the LEDs described in table 6.1.
6.3 Key Descriptions
Refer to figure 6.1 for the location of the keys described in table 6.2.
Table 6.1 – LED Descriptions
No. LED LED State Description
➊
PROG Steady Red (On) Indicates the drive is in programming mode.
(Off) Indicates the drive is in operational Mode.
➋
RUN Steady Red (On) Indicates the drive is running at commanded speed.
Flashing Red Indicates drive is accelerating or decelerating to new
speed setting.
(Off) Drive is not running.
➌
FWD Steady Red (On) Indicates the drive is in forward operation.
(Off) Indicates the drive is in reverse operation.
➍
STP/FLT Steady Red (On) Indicates the drive is in a stopped position.
Flashing Red Indicates the drive is faulted.
(Off) Drive is running.
Table 6.2 – Key Descriptions
Key Name Description
Run Key
• Starts the drive.
• Active when the input mode is programmed for
keypad control.
Stop Key
• Stops the drive in programmed stop mode.
• Always active.
• Reset active faults.
Ent/Prog Key
• Accesses programming menu and locks in
changed values.
• To enter programming mode, the Ent/Prog key
must be held in for 2 seconds.
• Holding the Ent/Prog key for 2 seconds or more will
escape back to Control Reference Mode or back
out of a parameter edit function.