Filter
Top Products
Parameter Descriptions 7-9
P39 Stop Type
Range: 0
1
2
= Decelerate to Stop (Ramp)
= DC Brake to Stop
= Coast to Stop
Default:
0
Access Configurable
See Also:
P38, P42, F8-F11
Sets the active mode for all stop sources.
0 = Decelerate to Stop. Motor decelerates to 0 Hz and stops during the set
time.
1 = DC Brake to stop. See parameters F8 - F11 for further details.
2 = Coast to stop. Output frequency and voltage are shut down on a stop
command