Datalogic Scanning 4410 Scanner User Manual


 
Decoding
Product Reference Guide 2-9
Decoding
You can configure the Falcon’s decoding options by tapping on Start > Settings
> Control Panel > Decoding
. Decoder configuration can also be accomplished for
large numbers of terminals using
FMU (Falcon Management Utility).
There are two sections in the
Decoding control panel, each containing addi-
tional pages. There are six General Configuration pages and multiple Bar
Code symbology pages.
Configuration Control Panels
Select the desired configuration from the following options shown in Figure 2-
4, and the other
Decoding Properties figures on the following pages.
Use the pull-down menus or tap the left and right arrow keys to navigate the
different pages of the
Configure utility.
Figure 2-4. Decoding Properties: Audio
Audio: Sets volume, tone, duration, and number of various types of
beeps.
Other decoding parameters are described in Programming Parameters, starting
on page F-1; bar code settings are provided in Programming Bar Codes, starting
on page G-1.
To view other configuration options, select Configure > General from the menu