Filter
Top Products
Firmware Update Utility
Product Reference Guide 3-11
1. On the PC, click Start > Programs > Firmware Update Utility > Firmware
Update Utility
.
2. Set
Communicate Using to the communications port to which the dock
is attached to (ActiveSync, USB, COM1 or COM2.)
3. Click browse (
...) and navigate to the file location.
4. Select the current *.img file and click
Open.
5. Verify that the Falcon is turned on. Insert the Falcon into a powered
dock connected to the host computer.
6. Click
Update Terminal on FUU on the host PC.
7.
FUU will restore the firmware on the Falcon as shown on page 3-9.