Filter
Top Products
Software Applications
3-12
Falcon
®
4400 Series with Windows
®
CE
8. After the firmware has been restored, the Falcon will automatically
reset.
AutoStart
The AutoStart program provides three functions:
• Allows you to create a list of applications (with optional command
line arguments) to run automatically prior to loading CAB files.
• Automatically reinstalls specified CAB files when the Falcon is Hard
Reset.
• Allows you to create a list of applications (with optional command
line arguments) to run automatically after loading CAB files.
AutoStart launches each time the Falcon is rebooted. AutoStart first runs
PreAuto.ini (reference Table 3-2 for the location), executing each line
with the specified command line arguments. It will take into account any
AutoStart options at the begining of the line.
Upon a Cold Reset, AutoStart installs all the CAB files located in the
AutoStart CAB folder. If the AutoStart CAB folder does not exist, no CAB
files will be installed.
Table 3-1. AutoStart CAB folder location
AutoStart will then run the Autostart.ini (reference Table 3-2 for the
location), executing each line with the specified command line arguments. It
will take into account any AutoStart options at the beginning of the line.
Please be patient and do not remove the Falcon from the Dock during this proce-
dure. The firmware image of the Falcon can take as long as:
• 12 minutes to download using a USB connection.
• 22 minutes to download using a serial connection with 115K baud rate.
• 130 minutes to download using a serial connection with 19.2K baud rate.
Product Operating System Location
F4400
Windows CE
\FlashFX Disk
Windows Mobile
\FlashDisk