Filter
Top Products
SNMP
Product Reference Guide 4-9
Figure 4-8. The Network Icon
Network and Dialup Connections
Use Network and Dialup setup to administer the IP network settings for spe-
cific connections. The system defaults to Summit Client Utility (SCU) for
wireless communications, and normal Windows Dialup and Networking for
all other network connections. See About the Summit Client Utility on
page 2-39 for more information on SCU.
Windows Zero Config
The Falcon can optionally be set to use Windows Zero Config, if preferred.
Refer to Microsoft online help for further information.
SNMP
SNMP (Simple Network Management Protocol) is the standard protocol for
managing devices on a network. The Falcon Management Utility (FMU)
makes use of SNMP to send and receive configuration information to the Dat-
alogic Mobile terminals. Since the networked terminals are constantly running
SNMP, this allows FMU to interface with the terminal at any time, without
requiring user intervention on the terminal.
11:57 AM
System Tray
Network
Connection Icon
Connected Not Connected