Filter
Top Products
112 Configuring System Information
The SNTP Broadcast Interface Table page contains the following fields:
•
Unit No.
— Indicates the stacking member on which the SNTP interface is enabled.
Interface — Contains an interface list on which SNTP can be enabled:
•
Receive Servers Updates
— Enables or disables SNTP on the specific interface.
–
Enable
— Enables the interface to receive updates from the SNTP server.
–
Disable
— Interface does not receive updates from the SNTP server.
•
Remove
— Removes SNTP from a specific interface, when selected.
–
Checked
— Removes the SNTP interface entry.
–
Unchecked
— Maintains the SNTP interface entry.
Adding an SNTP Interface
1
Open the
SNTP Broadcast Interface Table
page.
2
Click
Add.
The
Add SNTP Interface
page opens.
Figure 6-18. Add SNTP Interface
3
Define the relevant fields.
4
Click
Apply Changes
.
The SNTP interface is added, and the device is updated.
Defining SNTP Interface Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP
Broadcast Interface Table page.
Table 6-12. SNTP Interface Settings CLI Commands
CLI Command Description
sntp client enable Enables the Simple Network Time Protocol (SNTP) client on an interface.
show sntp configuration Shows the configuration of the Simple Network Time Protocol (SNTP).