Filter
Top Products
320 Configuring Switch Information
•
VLAN ID
— The VLAN ID for which the table is queried.
•
Address Table Sort Key
— Specifies the means by which the Dynamic Address Table is sorted.
The address table can be sorted by Address, VLAN or Interface.
Redefining the Aging Time
1
Open the
Dynamic Address Table
.
2
Define the
Address Aging
field.
3
Click
Apply Changes
.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1
Open the
Dynamic Address Table
.
2
Define the parameter by which to query the
Dynamic Address Table
.
Entries can be queried by
Port
,
MAC Address
, or
VLAN ID
.
3
Click
Query
.
The
Dynamic Address Table
is queried, and the results are displayed.
Sorting the Dynamic Address Table
1
Open the
Dynamic Address Table
.
2
From the
Address Table Sort Key
drop-down menu, select whether to sort addresses by address, VLAN
ID, or interface.
3
Click
Query
.
The
Dynamic Address Table
is sorted.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for aging, querying, and sorting dynamic
addresses as displayed in the Dynamic Address Table.
Table 7-17. Query and Sort CLI Commands
CLI Command Description
bridge aging-time
seconds
Sets the address table aging time.
show bridge address-table
[vlan vlan]
[
ethernet interface | port-channel
port-
channel-number
]
Displays classes of dynamically created entries in the bridge-
forwarding database.