Filter
Top Products
210 Configuring System Information
•
Tx Optional TLVs
— Contains a list of optional TLVs advertised by the port. For the complete list,
see the
Available TLVs
field.
•
Management IP Address
— Indicates the management IP address that is advertised from the
interface.
–
Use Default
— Specifies the way TLVs are included:
–
Checked
— Only mandatory TLVs are used by default; they are Chassis subtype (MAC address),
Port subtype (port number), and TTL (time-to-leave equal to 120s).
–
Unchecked
— User-defined TLVs consisting of the 3 above mentioned mandatory TLVs plus
optional TLVs that are moved by user from the Avalable set of TLVs.
The LLDP Port Table page displays the LLDP Port Configuration. To open the LLDP Port Table,
click Security
→ LLDP → Port Settings → Show All in the tree view.
Figure 6-78. LLDP Port Table
Table 6-44. LLDP Port settings CLI Commands
The following is an example of the CLI commands:
CLI Command Description
clear lldp rx interface Restarts the LLDP RX state machine
and clearing the neighbors table
lldp optional-tlv tlv1 [tlv2 … tlv5] Specifies which optional TLVs from the
basic set should be transmitted
lldp enable [rx | tx | both] To enable Link Layer Discovery
Protocol (LLDP) on an interface.
Console(config)# interface ethernet g1
Console(config-if)# lldp enable