Filter
Top Products
176 Configuring System Information
Defining Access Profiles Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Access
Profiles page.
Table 6-33. Access Profiles CLI Commands
CLI Command Description
management access-list name Defines an access-list for management, and enters
the access-list context for configuration.
permit [ethernet interface-number |
vlan vlan-id | port-channel number]
[service service]
Sets port permitting conditions for the management
access list.
permit ip-source {ipv4-address | ipv6-
address / prefix-length} [mask mask |
prefix-length] [ethernet interface-
number | vlan vlan-id | port-channel
number] [service service]
Sets port permitting conditions for the management
access list, and the selected management method.
deny [ethernet interface-number | vlan
vlan-id | port-channel number] [service
service]
Sets port denying conditions for the management
access list, and the selected management method.
deny ip-source {ipv4-address | ipv6-
address / prefix-length} [mask mask |
prefix-length] [ethernet interface-
number | vlan vlan-id | port-channel
number] [service service]
Sets port denying conditions for the management
access list, and the selected management method.
management access-class {console-only
| name}
Defines which access-list is used as the active
management connections.
show management access-list [name] Displays the active management access-lists.
show management access-class Displays information about management access-
class.