Filter
Top Products
296 Configuring Switch Information
Binding a DHCP Snooping Database
1
Open the
Binding Database
page.
2
Click
Add
.
The
Bind DHCP Snooping
page opens.
Figure 7-20. Bind DHCP Snooping Page
3
Define the fields.
4
Click
Apply Changes
.
Configuring DHCP Snooping Binding Database with CLI Commands
The following table summarizes the equivalent CLI commands for configuring DHCP Snooping
Binding Database
.
Table 7-11. DHCP Snooping Binding Database CLI Commands
CLI Command Description
ip dhcp snooping binding mac-address vlan-id
ip-address {ethernet interface | port-channel
port-channel-number} expiry seconds
no ip dhcp snooping binding mac-address
vlan-id
Use the ip dhcp snooping binding privileged EXEC command
to configure the DHCP snooping binding database and to add
binding entries to the database. Use the no form of this
command to delete entries from the binding database.
clear ip dhcp snooping database Use the clear ip dhcp snooping database privileged EXEC
command to clear the DHCP binding database.
show ip dhcp snooping binding [mac-address
mac-address] [ip-address ip-address] [vlan
vlan] [ethernet interface | port-channel port-
channel-number]
Use the show ip dhcp snooping binding user EXEC command
to display the DHCP snooping binding database and
configuration information for all interfaces on a switch.