Filter
Top Products
132 Configuring System Information
The IP Interface Parameters page contains the following parameters:
•
IP Address
— The interface IP address.
•
Prefix Length
— The number of bits that comprise the IP address prefix.
•
Interface
— The interface type for which the IP address is defined. Select
Port
,
LAG
, or
VLAN
.
•
Ty p e
— Indicates whether or not the IP address was configured statically.
•
Remove
— Removes the interface from the
IP Address
drop-down menu.
–
Checked
— Removes the selected interface.
–
Unchecked
— Maintains the selected interface.
Adding an IPv4 IP Interface
1
Open the
IPv4
Interface Parameters
page.
2
Click
Add
.
The
Add a Static
IPv4
Interface
page opens.
Figure 6-28. Add a Static IPv4 Interface
In addition to the parameters on the
IP Interface Parameters
page, the
Add a Static IP Interface
page
contains the following parameter:
•
Network Mask
— Indicates the subnetwork mask of the IP address.
3
Complete the fields on the page.
4
Click
Apply Changes
.
The new IP address is added to the interface, and the device is updated.
Modifying IPv4 Address Parameters
1
Open the
IPv4
Interface Parameters
page.
2
Select an IP address in the
IP Address
drop-down menu.