Filter
Top Products
342 Configuring Switch Information
Displaying the Rapid Spanning Tree (RSTP) Table
1
Open the Rapid Spanning Tree (RSTP) page.
2
Click
Show All
.
The
Rapid Spanning Tree (RSTP) Table
opens.
Figure 7-41. Rapid Spanning Tree (RSTP) Table
Defining Rapid STP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining Rapid STP parameters as
displayed in the Rapid Spanning Tree (RSTP).
The following is an example of the CLI commands:
Table 7-22. RSTP Settings CLI Command
CLI Command Description
spanning-tree link-type {point-to-point | shared} Overrides the default link-type setting.
spanning tree mode {stp | rstp | mstp} Configure the spanning tree protocol currently running.
clear spanning-tree detected-protocols [ethernet
interface | port-channel port-channel-number]
Restarts the protocol migration process.
show spanning-tree [ethernet interface | port-channel
port-channel-number]
Displays spanning tree configuration.
console(config)# interface ethernet 1/e5
console(config-if)# spanning-tree link-type shared
console(config-if)#
spanning tree mode rstp